General Production Worker @ Aerotek

Job Title: General Production WorkerJob DescriptionThe General Production Worker focuses on repairing and maintaining large production bins, specifically their sides and feet, to support daily manufacturing operations. The role involves careful use of hand and power tools, adherence to detailed safety instructions, and occasional support of forklift-related duties in a fast-paced warehouse environment.

Responsibilities

• Repair the sides and feet of large production bins according to detailed instructions and established procedures.
• Inspect bins to identify damaged or worn components, including sides, feet, and internal debris, and determine necessary repairs.
• Use pallet jack lifts to move bins safely to and from the work area, avoiding manual lifting of bins whenever possible.
• When bins must be moved by hand, coordinate with a second person and wear leather gloves to reduce the risk of muscle injuries and cuts from sharp edges.
• Visually examine bins for sharp edges and pinch points, and use caution when opening bins to prevent injury.
• Remove all debris from inside bins, including paper, regrind, and loose objects, to prepare them for repair.
• Operate the designated cutting tool to remove plastic bin feet, keeping both hands on the tool and maintaining a safe distance from the cutting edge while it is running.
• Unplug cutting tools before changing blades or performing any maintenance on the equipment.
• Avoid using unauthorized tools, such as screwdrivers, to remove bin feet, and follow approved methods only.
• Wear leather gloves when removing and installing bin feet, and use a plastic impact hammer to tap feet into place while keeping hands clear of impact areas.
• Remove rods that hold bin sides in place using the chisel holder with reaming tool, following safety guidelines.
• Install replacement rods by hand while moving bin sides up and down to allow the rod to slide into position, then use a plastic impact hammer to secure the rod for the final few inches.
• Lift and position side panels that may weigh up to 50 pounds, holding panels away from the body and at shoulder height as required for installation.
• Perform assembly, disassembly, and repair tasks on bins using appropriate hand tools and power tools.
• Support forklift-related duties as needed after cross-training, following all safety and operational procedures.
• Interact professionally with managers, employees, vendors, and customers as required in the course of daily operations.
• Maintain regular, predictable, and punctual attendance to support consistent production output.
• Work under pressure to meet deadlines while maintaining a positive attitude and providing courteous, customer-focused service.
• Work independently to carry out assignments to completion within given instructions, prescribed routines, and accepted standard practices.
• Collaborate effectively with team members, proactively contributing to group objectives and volunteering to assist others when needed.
• Communicate clearly and effectively, conveying facts and information both verbally and in writing to internal and external stakeholders.

Essential Skills

• Experience using hand tools for assembly, disassembly, and repair tasks.
• Experience using power tools safely, including cutting tools and impact tools, with adherence to lockout and unplugging procedures when changing blades.
• Ability to perform physical tasks such as lifting side panels up to 50 pounds and holding them at shoulder height while working.
• Ability to use pallet jacks to move large bins safely within a manufacturing and warehouse environment.
• Ability to follow detailed written and verbal instructions for bin repair, including proper removal and installation of bin feet and sides.
• Ability to maintain regular, predictable, and punctual attendance in a production setting.
• Strong verbal and written communication skills to interact effectively with internal and external customers.
• Ability to work under pressure and meet deadlines while maintaining a positive attitude and providing exemplary customer service.
• Ability to work independently and complete assignments within established instructions, routines, and standard practices.
• Ability to collaborate well with others, proactively contributing to team objectives and volunteering to help coworkers.
• Comfort working in a manufacturing and warehouse environment with ongoing production activity.
• Basic comfort with computer usage and typing, with computer skills preferred for documentation or communication.

Additional Skills & Qualifications

• Previous experience in assembly, repair, or production work in a manufacturing or warehouse setting.
• Experience with bin repair or similar maintenance tasks involving plastic components and mechanical fasteners.
• Familiarity with forklift operations and willingness to be cross-trained to support forklift duties as needed.
• Ability to recognize and avoid pinch points and sharp edges while working with large plastic bins and components.
• Demonstrated ability to provide professional, customer-focused service when interacting with managers, employees, vendors, and customers.
• Strong teamwork and collaboration skills, including clear communication and willingness to assist others.
• Preferred basic computer and typing skills for recording information and communicating with team members.

Why Work Here? You will join a manufacturing team that produces plastic bottles for well-known beverage brands, contributing to products used every day. The organization makes a deliberate effort to build a positive culture where contractors are treated as true team members from day one and are included in periodic employee events. You can expect to be held to the same standards as the broader team while being supported in your role, with opportunities to learn new skills such as forklift operation and cross-training in production processes.

Work EnvironmentThis role is based in a manufacturing and warehouse facility located in Henderson, working on the 2nd shift from 2:00 p.m. to 10:30 p.m. The environment involves active production lines, movement of large bins, and regular use of hand tools, power tools, pallet jacks, and plastic impact hammers. Team members wear jeans and a t-shirt as standard dress, complemented by required personal protective equipment, including steel-toe or composite-toe shoes or boots that are at least 6 inches high, all-leather, and equipped with non-slip soles. The culture emphasizes treating contractors as employees, holding everyone to the same standards from day one, and including all team members in periodic employee events within a busy, safety-focused production setting.

Job Type & LocationThis is a Contract to Hire position based out of Henderson, NV.

Pay and BenefitsThe pay range for this position is $18.00 - $18.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following:

Medical, dental & vision

Critical Illness, Accident, and Hospital

401(k) Retirement Plan Pre-tax and Roth post-tax contributions available

Life Insurance (Voluntary Life & AD&D for the employee and dependents)

Short and long-term disability

Health Spending Account (HSA)

Transportation benefits

Employee Assistance Program

Time Off/Leave (PTO, Vacation or Sick Leave)

Application DeadlineThis position is anticipated to close on Nov 9, 2026.

Workplace TypeThis is a fully onsite position in Henderson,NV.

About Aerotek

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK.

Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.

The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance

Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector

It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI)

We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.