Now hiring

Embedded Software Engineer - N3XT (m/f/d) @ quantumsystemsgmbh

Gilching, Bavaria, DEOnsiteFull-time
Apply with ResuMinder

Opens on the employer's site

About this role

The Embedded Engineer brings N3XT’s hardware to life. You write firmware for sensor front-ends, payload controllers, power systems and communication modules, bring up new boards with the hardware engineers, and build the low-level interfaces the application software depends on. Prototypes in N3XT move fast. A board designed a few weeks ago lands on your bench, runs your firmware the same day and is on the test field by the end of the week. You sit between hardware and software and keep both sides honest about timing, power and interfaces.

  • What is your Day to Day

Mission

  • Develop firmware in C and C++ for microcontrollers and SoCs (e.g. STM32, NXP i.MX , Xilinx Zynq), bare-metal or on an RTOS.
  • Bring up new boards together with the hardware engineers: drivers, peripherals, debugging with JTAG, oscilloscope and logic analyser.
  • Implement communication interfaces and protocols: CAN, UART, SPI, I²C, Ethernet, USB and radio links.
  • Integrate embedded Linux on compute modules: bootloader, kernel configuration, device tree and drivers.
  • Write real-time firmware for sensor acquisition and control, with attention to timing, power and reliability.
  • Define and document the interfaces to the application software and to the autopilot.
  • Support field tests and diagnose problems directly on the hardware.
  • Document firmware and interfaces for handover to line engineering.

Skills

CC++RTOSTM32NXP i.MXXilinx ZynqJTAGoscilloscopelogic analyzer

Ready to apply?

Install the ResuMinder extension and we'll auto-fill the application in seconds — no rewriting.

See how your CV scores