Now hiring

Test Team Manager @ Vertiv

IEOnsiteFull-timeJob reference 20284547
Apply with ResuMinder

Opens on the employer's site

About this role

The Campsie and Burnfoot Test Team Manager leads the safe, capable and consistent execution of electrical testing across both sites. The role is accountable for test-team safety, people leadership, capacity, operational delivery, execution compliance, test records, equipment readiness, competence and the integrity of pass/fail decisions.

The role protects the customer and the business by ensuring that only authorised personnel use approved methods and calibrated equipment, that test results are complete and traceable, and that abnormal conditions are stopped and escalated without delivery pressure weakening safety or acceptance standards. The manager works closely with Operations, Engineering, Quality, Project Management and customers while preserving independent test judgement. Engineering retains ownership of test definitions, technical methods, limits and non-standard requirements; Operations retains ownership of build quality and production readiness; the Test function owns controlled execution and objective evidence.

Key Responsibilities

  • Lead the Campsie and Burnfoot Test Teams through clear site supervision, team-lead accountability and consistent daily management across shifts.
  • Own safety, quality, delivery, cost and people performance for the test function, with electrical safety and credible product risk taking priority over schedule pressure.
  • Ensure only trained, assessed and authorised personnel perform each category of LV or MV testing; maintain a live competence and authorisation matrix with defined renewal and reassessment requirements.
  • Plan and balance workload, staffing, shift coverage and specialist capability across both sites using demand, product mix, test complexity, customer-witness requirements and available capacity.
  • Chair test tier reviews and maintain visible control of planned workload, readiness constraints, staffing, equipment status, failures, retests, overdue records and escalations.
  • Confirm test readiness before work starts, including approved drawings and test instructions, correct product configuration, required customer documentation, safe test area, competent resources and available calibrated equipment.
  • Ensure routine and customer-specific testing is executed to the approved sequence and acceptance criteria, including applicable functional checks, insulation resistance, dielectric/flash, ductor or main-circuit resistance, primary injection, secondary injection, protection settings, interlocks and mechanical operation.
  • Own execution compliance and the integrity of pass/fail decisions. Stop or hold testing and prevent progression where safety, test readiness, evidence, calibration, competence, acceptance criteria or product conformity is not assured.
  • Ensure test books, scripts, FAT records, certificates, protection settings, measurement results, witness sign-offs and release evidence are completed accurately, contemporaneously and traceably.
  • Lead customer and third-party witness testing in a controlled, professional manner, coordinating readiness and communication without permitting customer or schedule pressure to bypass approved requirements.
  • Ensure failed tests, defects and abnormal results are made safe, contained, technically described and escalated. Control repair, authorised disposition and full retest or defined regression testing before acceptance.
  • Use defect, retest, delay and downtime data to separate product defects from test-system, documentation, equipment, readiness and capability losses; drive accountable corrective action with the responsible functions.
  • Partner with Engineering and AME to maintain controlled test methods, resolve technical ambiguity, improve testability and validate changes to test programmes, fixtures, software and equipment before deployment.
  • Partner with Quality to support NCR, 8D and root-cause activity, verify effectiveness and feed recurring failure modes into PFMEA, control plans, standard work, training and lessons learned.
  • Own test equipment inventory, calibration visibility, preventative maintenance, software/configuration control, safe use, breakdown escalation, spares strategy and capital-investment priorities.
  • Develop the Test Team Supervisors, Team Leads, Test Engineers, Technicians and Administrators through clear objectives, coaching, practical competence assessment, succession planning and fair performance management.
  • Standardise critical test processes, records, competency requirements, escalation rules and KPIs across Campsie and Burnfoot while recognising controlled product- or site-specific differences.
  • Develop and maintain leader standard work, daily/weekly/monthly management routines, resource plans, role profiles and escalation routes that sustain reliable performance.
  • Provide concise reporting to Quality and site leadership on safety, workload, capacity, test FPY, failures, retest hours, downtime, documentation readiness, calibration, competence, customer/FAT issues and investment needs.
  • Escalate without delay any unsafe condition, unauthorised test or release, expired calibration, missing acceptance criteria, unresolved high-risk failure, falsified or incomplete test evidence, or credible customer escape.

Key Interfaces & Decision Authority

  • Business Unit / Plant Quality Leadership: Aligns test governance, customer protection, priorities, resources, risk and escalation.
  • Operations / Planning: Aligns production readiness, workload, schedule and capacity while retaining independent test decisions.
  • Design Engineering / AME / Test Engineering: Owns test definitions, methods, limits, technical changes and disposition support.
  • Project Management / Customer Teams: Coordinates FAT readiness, customer requirements, witness activity, records and commitments.
  • EHS / Facilities / Maintenance: Aligns electrical safety controls, test-area suitability, equipment condition and statutory or company requirements.
  • HR / Learning & Development: Supports recruitment, workforce planning, competence development, succession and performance processes.
  • Decision Authority
  • Can stop or suspend testing, place equipment on hold and prevent progression or release when safety, conformity or required evidence is not assured.
  • Can refuse test readiness, pass/fail acceptance or customer witness activity where approved requirements, competent resources, equipment status or documentation are incomplete.
  • Can require documented technical review, authorised disposition, corrective action and defined retest before acceptance.
  • Can allocate and rebalance test resources between Campsie and Burnfoot in line with approved business priorities, competence and safe working arrangements.
  • Can escalate unresolved safety, technical, customer, compliance, resource or equipment risk through the approved governance route.
  • Cannot independently define or change design acceptance criteria, approve technical concessions, alter test limits or release nonconforming product unless formally authorised.

KPIs / Success Measures

  • Zero harm and full compliance with electrical-safety controls, authorised working and test-area rules.
  • Test first-pass yield, failure rate and repeat-test rate by product family and site.
  • Retest hours, test downtime and lost capacity by cause, including production readiness, documentation, equipment and resource constraints.
  • On-time test completion against the agreed plan and customer/FAT commitments.
  • Test-book and FAT-documentation right-first-time completion, traceability and closure.
  • Competence and authorisation coverage for required LV, MV, protection and customer-specific test activities.
  • Calibration and preventative-maintenance compliance, equipment availability and breakdown response.
  • Test-related NCRs, customer escapes, repeat failures, corrective-action ageing and verified effectiveness.
  • Test-related COPQ, rework and capacity loss, with Finance validation where required.
  • Employee development, succession coverage, retention, attendance and completion of agreed capability plans.
  • Adherence to leader standard work, tier review cadence and horizontal deployment of lessons learned.

EHS & Compliance Accountabilities

  • Comply fully with Vertiv EHS requirements, site rules, electrical-safety controls, PPE requirements, safe systems of work and applicable statutory obligations at both locations.
  • Ensure test areas are controlled, access is restricted, barriers and warning systems are effective, stored energy is managed and emergency arrangements are understood before energisation or high-energy testing.
  • Ensure test equipment is suitable, approved, maintained and within calibration, and that defective or suspect equipment is removed from service.
  • Ensure personnel are practically competent and formally authorised for the test activity and voltage level they perform; training attendance alone is not evidence of competence.
  • Never approve or enable testing, progression or release where product safety, personnel safety, acceptance criteria, test evidence or conformity remains unresolved.
  • Maintain accurate, confidential, controlled and auditable records in line with the Quality Management System, ISO 9001:2015, approved procedures, applicable product standards and customer requirements.

Role Profile Summary

This role is suited to an experienced electrical test leader who can manage a multi-site operational function while maintaining independent technical and safety judgement. The successful candidate will combine practical LV and MV testing knowledge, disciplined people leadership, production awareness and strong evidence control. They must be capable of leading through supervisors and team leads, balancing capacity across two plants, engaging confidently with customers and technical functions, and stopping work when safety or product conformity is not assured.

Essential Experience

  • Substantial experience in electrical testing, commissioning, manufacturing test or a comparable safety-critical engineered-product environment.
  • Proven leadership of technical teams, including supervisors or team leads, workload planning, coaching, competence management and performance accountability.
  • Practical experience with LV switchgear testing and meaningful exposure to MV switchgear, protection systems or high-voltage test activity.
  • Experience interpreting electrical schematics, single-line diagrams, wiring diagrams, protection studies, specifications and controlled test instructions.
  • Experience managing test failures, production pressure, technical escalation, customer witness activity and evidence-based release decisions.
  • Experience controlling test records, calibration, equipment readiness, training/authorisation matrices and traceability.
  • Experience using operational data to improve first-pass yield, reduce retest and downtime, manage capacity and justify resources or capital investment.
  • Experience working across Operations, Engineering, Quality, Project Management, EHS and customers in a matrix manufacturing environment.
  • Essential Technical Competence
  • Strong understanding of electrical-test hazards, safe energisation, isolation, stored energy, controlled access and stop-work expectations.
  • Working knowledge of functional testing, insulation resistance, dielectric/flash testing, main-circuit resistance/ductor testing, primary injection, secondary injection, protection settings, interlocks and mechanical checks as applicable to LV and MV switchgear.
  • Ability to assess test readiness, equipment suitability, calibration status, competence evidence, acceptance criteria and the completeness of test records.
  • Ability to distinguish product failure from test-system, method, equipment, configuration, documentation or operator causes and to lead structured problem solving.
  • Ability to manage FAT and customer-witness testing with clear communication, professional control and accurate evidence.
  • Competence with Microsoft Office and relevant business, test, document-control and reporting systems; able to create practical dashboards and capacity plans.
  • Clear written and verbal communication, sound judgement and confidence to challenge unsafe or unsupported decisions at all organisational levels.
  • Desirable Experience
  • Experience in switchgear, power distribution, critical infrastructure, busbar systems, data-centre equipment or other high-mix engineered-to-order manufacturing.
  • Hands-on experience with protection relay configuration/testing, breaker programming, primary/secondary injection and customer protection studies.
  • Experience standardising test methods, digitalising test records, deploying test software or improving automated test infrastructure.
  • Experience with ISO 9001 audits, internal laboratory or calibration controls, product certification, customer audits and controlled engineering change.
  • Lean / VOS experience, including tiered daily management, leader standard work, visual management, problem solving, standard work and waste reduction.
  • Experience operating across Northern Ireland and Republic of Ireland sites and managing distributed or shift-based teams.

Behavioural Expectations

  • Own It - takes full accountability for safe and controlled test execution across both sites and follows risks through to verified closure.
  • Act With Urgency - stops unsafe or uncontrolled work and escalates material customer, compliance, capacity or technical risk promptly.
  • Foster a Customer-First Mindset - protects the customer through objective evidence, reliable FAT execution and no-fault-forward discipline.
  • Think Big and Execute - connects daily failures and delays to systemic capability, capacity, standardisation and investment needs.
  • Lead by Example - remains factual, calm and independent when delivery pressure challenges safety or acceptance standards.
  • Drive Continuous Improvement - reduces retest, downtime, documentation burden and site-to-site variation through standard work and learning.
  • Learn and Seek Out Development - builds knowledge of products, protection systems, standards, digital test methods and leadership practice.

Personal Attributes

  • Visible, practical leader who spends time at the point of work and understands the realities of both sites and shifts.
  • Safety-led, evidence-based and willing to make difficult stop/hold decisions when requirements are not met.
  • Organised and capable of balancing competing customer, production, resource and technical priorities without losing control or traceability.
  • Credible with test technicians, engineers, operations leaders and customers; able to translate technical risk into clear business decisions.
  • Fair, consistent and development-focused people manager who sets expectations and follows through.
  • Collaborative across functions while preserving the independence of test judgement.

Preferred Qualifications

  • Degree, HNC/HND, apprenticeship or equivalent practical experience in Electrical Engineering, Power Engineering, Test Engineering or a related discipline.
  • Recognised electrical qualification and evidence of relevant LV/MV test competence are strongly preferred.
  • Training in electrical safety, protection testing, structured root-cause analysis, internal auditing, Lean / Six Sigma or people leadership is advantageous.
  • Professional engineering membership or progress toward professional registration is advantageous.

#vertivireland

Skills

Electrical TestingCalibration

Ready to apply?

Install the ResuMinder extension and we'll auto-fill the application in seconds — no rewriting.

See how your CV scores